Honda HP500H Manuel De L'utilisateur page 31

Dumping loads
Dump loads with the power carrier stopped and the drive clutch levers
released.
1.Pull the carrier bed release lever, and tilt the carrier bed by lifting the
handlebar.
2.After dumping the load, push down firmly on the handlebar to lock
the carrier bed in the normal position.
Before operating the power carrier check that the carrier bed is locked.
If the carrier bed is not locked, it may tilt while going downhill and
accidentally dump the load, which may cause personal injury and
property or equipment damage.
28
LIFT
LIFT
CARRIER BED RELEASE LEVER
DOWN