Publicité
Les langues disponibles
Les langues disponibles
> Before Start
> Part Names
Miscellaneous
∫ Tuner
FM Frequency Step
Select a frequency step depending on your area of residence.
Select "0.2 MHz (Default Value)" or "0.05 MHz".
0 When this setting is changed, all radio presets are deleted.
∫ Firmware Update
Update Notice
Availability of a firmware update will be notified via network.
"Enable (Default Value)": Notify updates
"Disable": Do not notify updates
Version
The current firmware version will be displayed.
Update via NET
Press ENTER to select when you want to update the firmware
via network.
0 You will not be able to select this setting if you do not have
Internet access or there is nothing to update.
Update via USB
Press ENTER to select when you want to update the firmware
via USB.
0 You will not be able to select this setting if a USB storage
device is not connected or there is nothing to update in the
USB storage device.
0 Wait for a while if "Firmware Update" cannot be selected. It will appear when the network
feature is started.
∫ Initial Setup
You can make the Initial Setup from the System Setup menu.
0 Wait for a while if "Initial Setup" cannot be selected. It will appear when the network
feature is started.
∫ Lock
Setup Parameter
Lock the Setup menu to protect the settings.
"Locked": The menu is locked.
"Unlocked (Default Value)": The menu is unlocked.
38
All manuals and user guides at all-guides.com
> Install
> Initial Setup
> Playback
∫ Load Default
Load Default
Reset the unit to return the settings to the status at the time of
shipment. Reset is complete when "Clear" is displayed on the
display and the unit switches to standby.
Your settings will also be initialized when you reset, so note
down your settings before starting reset.
Advanced Setup
| Firmware Update | Others
E
N
Publicité
