Fracarro CIR700 Serie Guide Rapide page 17

Function Options
MIRROR OFF / ON
BRIGHTNESS 000-255
CONTRAST 000-255
SHARPNESS 000-255
HUE 000-255
GAIN 000-255
ATR (Adaptive Tone Reproduction)
Function Options
LUMINANCE LOW - MID - HIGH
CONTRAST LOW – MIDLOW – MID – MIDHIGH - HIGH
MOTION DET (Motion Detection)
This item is used to set the Motion Detection function on 4 areas
Function Options
DETECT SENSE 000-127
BLOCK DISP OFF / ON
MONITOR AREA OFF / ON
AREA SEL 1/4 ; 2/4 ; 3/4 ; 4/4
All manuals and user guides at all-guides.com
Meanings
OFF: Normal output ON: Horizontally flipped output
Select to set the screen brightness
Select to set the screen contrast
Select to set the screen sharpness
Select to adjust the hue
Select to adjust the gain
SETUP MENU
LENS AUTO<┘
SHUTTER/AGC AUTO<┘
WHITE BAL ATW<┘
BACKLIGHT OFF
PICT ADJUST <┘
ATR OFF
MOTION DET
NEXT <┘
EXIT<┘ SAVE ALL<┘
Meanings
Select to set the extent of the luminance compression
Select to set the extent of the contrast enhancement.
SETUP MENU
LENS AUTO<┘
SHUTTER/AGC AUTO<┘
WHITE BAL ATW<┘
BACKLIGHT OFF
PICT ADJUST <┘
ATR OFF
MOTION DET
NEXT <┘
EXIT<┘ SAVE ALL<┘
Meanings
Select to set the motion detection sensitivity
Disable the area exclusion / Set the areas to be excluded
in the movement detection / Enable the signalization
of movement on the image (the areas will be
highlighted by luminous squares)
OFF: The monitoring frames are not used.
ON: The monitoring frames are used
Select to deinfe the monitoring frame to be set
17