Fracarro CIR700 Serie Guide Rapide page 16

PUSH The camera will find the best settings in any condition.
Adjust the color temperature to 3,200°K for indoor spaces lit with neon lights.
USER1
Press ENTER to open the submenu and select the R and B settings manually
Adjust the color temperature to 6,300°K for shooting outdoors.
USER2
Press ENTER to open the submenu and select the R and B settings manually
ANTI CR Enable Color Rolling blanking mode
Press ENTER to open the submenu and select the R and B level.
MANUAL When regulating R, the B component will also be automatically updated (color range from
1,800°K to 10,500°K).
For a proper setting, point the camera to a white piece of paper and press ENTER.
PUSH Select PUSH LOCK when it is dark or the color temperature is high around the object or
LOCK when there is a fluorescent light around the object or when the light is constantly
changing.
ATW
Function Options
SPEED 000-255
DELAY CNT 000-255
ATW FRAME x0.50; x1.00; x1.50; x2.00
ENVIROMENT INDOOR/OUTDOOR
BACKLIGHT (Back light Compensation)
SETUP MENU
LENS AUTO<┘
SHUTTER/AGC AUTO<┘
WHITE BAL ATW<┘
BACKLIGHT OFF
PICT ADJUST <┘
ATR OFF
MOTION DET
NEXT <┘
EXIT<┘ SAVE ALL<┘
Select to set BACKLIGHT to OFF, BLC or HLC.
By selecting the BLC, normal BLC is enabled; the light level in areas too luminous is compensated while the
HLC is used to cover those overly luminous image parts with black.
PICT ADJUST
16
All manuals and user guides at all-guides.com
Meanings
Select to adjust the pull-in speed of ATW.
Select to set the time-based hysteresis of ATW.
Select to set the pull-in frame magnification.
Select to set the pull-in frame (indoor/outdoor) of ATW.
SETUP MENU
LENS AUTO<┘
SHUTTER/AGC AUTO<┘
WHITE BAL ATW<┘
BACKLIGHT OFF
PICT ADJUST <┘
ATR OFF
MOTION DET
NEXT <┘
EXIT<┘ SAVE ALL<┘