Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
On-Screen Display (OSD)
VCR Status & Clock Display
Press DISPLAY to display or remove
the overlay.
Channel
Function Status
Current Time
REC
1 2 : 0 0PM
Rec Time
0 : 25
-0 : 1 2 : 3 4
Remaining
NO V-CHIP DATA
(OTR mode
only,
see page
12.)
Tape Speed
Warning and Instruction Displays
OSD
PLEASE SET CLOCK BY
PRESSING ACTION KEY
CHECK CASSETTE RECORD TAB
TO CANCEL TIMER REC HOLD
DOWN STOP KEY FOR APPROX 3
SEC
NO CASSETTE
PLEASE PREPARE FOR TIM ER
REC
VIDEO HEADS MAY NEED
CLEANING PLEASE INSERT HEAD
CLEANING CASSETTE OR REFER
TO MANUAL
END: PLAY
VCR LOCK ACTIVATED
Blue Screen Display
Whenever a blank section of a tape comes up in
Play mode, or when the selected channel has no
broadcast signal with the Weak Signal Display set
to "OFF" (see page 27), the screen will turn solid
blue.
Counter
Channel & Function Display
When a function button is pressed (PLAY, FF, etc.)
CH08
or you change channels, the unit mode or channel
SP
number will be displayed.
These displays will alert you to a missed
operation or provide further instructions.
CAUTION
If you attempt to set or review a Timer Recording, or
set the On-Timer and the Clock is not set...
If you press REC, and a cassette is inserted with no
record tab...
If you press STOP during a Timer Recording...
If you press PLAY, FF, REW, or REC without a
cassette inserted...
If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a Timer
Recording is about to begin...
If head cleaning becomes necessary while playing
back a tape...
If you press a function button other than STOP/EJECT or
POWER while the unit is in VCR Lock mode...
CH 08
Page
8 - 11
3, 12
23
12
22 - 23
4
27
33
33
Publicité
