Transmission And Reception; Fm Radio Function; Save Radio Stations - Pni Pmr R18 Manuel Utilisateur

Transmission and Reception

Press the PTT side key and speak into the radio's microphone to transmit. The LED turns red.
Release the key to receive. The LED is green when the radio receives a signal.
Do not speak too close to the microphone or too loudly so as not to distort the transmitted signal.
Talk Around
This function allows you to communicate directly with other radios without a repeater. When you use the Talk Around function, the
transmission frequency is the same as the reception frequency. The CTCSS code is also the same.

FM Radio function

Press the FUN key [11]. The "F" icon will appear in the lower left corner of the screen. Press the [9] key to activate the FM Radio
function. To deactivate the FM radio function, press the FUN key again, then the [9] key. The voice prompt will announce "Exit".
Search for radio stations
Auto scan: Press the [9] or [10] key to scan the radio stations. Scanning will stop when a signal is detected.
Manual scan: Turn the channel selector to increase or decrease the frequency. Step: 50K.
Manually input the frequency: press the numeric keys to enter the desired frequency.

Save radio stations

After you have found the desired radio, press the FUN key + the 1-9 key (depending on the position where you want to save the
radio station).
User manual - 8