Philips HQ6735 Mode D'emploi page 13

All manuals and user guides at all-guides.com
2
Cause 1: the shaving heads are dirty.The shaver
B
has not been cleaned immediately after use
and/or has not been rinsed long enough and/or
the water used to rinse the shaver was not hot
enough.
Clean the shaver thoroughly before you
continue shaving (see 'Cleaning').
2
Cause 2: long hairs are obstructing the shaving
B
heads.
C
1
1
Remove the retaining frame.
C
Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it
could take several weeks before optimal shaving
performance is restored.
Remove the hairs.
Put the shaving heads back into the shaving
unit. Put the retaining frame back onto the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
B
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones.
Reduced shaving performance:
ENGLISH
15