Télécharger Imprimer la page

Fortin EVO-ALL Serie Instructions D'installation page 5

Masquer les pouces Voir aussi pour EVO-ALL Serie:

Publicité

This guide may change without notice. See www.fortin.ca for latest version.
Ce guide peut faire l'objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION
1
x1
HOLD
2
RELEASE
3
4
VÉHICULE BOUTON POUSSOIR
x1
PRESS
5
VÉHICULE BOUTON POUSSOIR
x1
PRESS
All manuals and user guides at all-guides.com
LED may differ depending on the module casing.
L'apparence des DELS peut différer selon le boîtier du module.
BLUE
ON
BLEU
PUSH-TO-START VEHICLE
Press and release the Push-to-Start
button to turn ON the ignition.
Appuyez et relâchez le bouton
démarrage (Push-to-Start) pour
allumer l'ignition.
IGNITION ON
PUSH-TO-START VEHICLE
Press and release the Push-to-Start
button once to turn off the ignition.
Appuyez et relâchez 1 fois sur le
bouton démarrage (Push-to-Start) pour
éteindre l'ignition.
IGNITION ON
Press and hold
programming button:
Insert
the 4-Pin (Data-Link)
connector.
 The Blue, Red, Yellow and
Blue & Red LEDs will
alternatively illuminate.
Release the programming
button when the LED is BLUE.
If the LED is not solid BLUE
disconnect the 4-Pin connector
(Data-Link) and go back to step 1.
Insert the required remaining
connectors.
VÉHICULE CLÉ RÉGULIÈRE
TURN
ON/RUN
FLASH
 The BLUE LED will flash
rapidly.
Key bypass programmed.
VÉHICULE CLÉ RÉGULIÈRE
TURN
OFF
IGNITION OFF
OFF
 The BLUE LED will turn off.
The module is now
programmed.
Use the remote of the remote
starter or security system to test
all of the supported features to
ensure proper programming.
the
Appuyez
et
enfoncé
le bouton de
programmation:
Insérez
le connecteur 4 pins
(Data-Link)
 Les DELs Bleue, Rouge,
Jaune et Bleue & Rouge
s'allumeront alternativement.
Relâchez le bouton de
programmation quand la DEL
est BLEUE.
Si le DEL n'est pas BLEU
débranchez le connecteur 4
pins (Data-Link) et allez au
début de l'étape 1.
Insérez les connecteurs
requis restants.
REGULAR KEY VEHICLE
Turn the Ignition to the ON/RUN
position.
Tournez la clé en position ignition
(ON).
 La DEL BLEUE clignotera
rapidement:
Réseau CAN programmé.
REGULAR KEY VEHICLE
Turn the Ignition to the OFF position.
Tournez la clé à OFF.
 La DEL BLEUE s'éteint.
Le module est
programmé.
Testez toutes les fonctions
supportées sur le véhicule avec la
télécommande du démarreur à
distance ou du système de sécurité.
5 / 7
Page
maintenir

Publicité

loading