Nikon Lite Touch Zoom 100W Manuel D'utilisation page 17

Lite Touch Zoom 100W
Lite Touch Zoom 100W QD
If " " blinks on the LCD panel, film is not properly loaded. Open the
camera back again and reload film.
Tips on DX-coded 35mm film
Number of frames
ISO (film speed)
With DX-coded film, film speed is set automatically.
Film speeds valid for automatic setting are ISO 50, 100, 200, 400, 800,
1600, and 3200.
With a non-DX-coded film, the film speed is automatically set to ISO 100.
4 Close the camera back, and
check that " " appears on
the film counter.
Once the camera back is closed, and
the film has been properly set, " "
appears on the LCD panel.
DX mark
DX code
Film cartridge
Preparations
En
17