Publicité
Les langues disponibles
Les langues disponibles
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid and ensure that water does not penetrate the
tool.
Never splash with water or clean with high pressure hose!
b) Clean connection rod with a soft brush.
c) Clean ventilation holes with soft brush.
d) Clean mixing blade and shaft with water.
Keep the ventilation slits (4) clear of dirt and residue so that the machine can be cooled adequately
.
Check/replace the gearbox grease after about 150h of operation.
6.2- Storage
- Clean tool before storage.
- Keep product, user manual and accessories in the original packaging.
- It is recommended to store the product in a clean, dry location, protected from frost, and keep it out
of children's reach (e.g. lock it up).
- Do not store product in temperatures lower than 0ºC (32ºF)
- Do not place or store any object on top of the product.
6.3- Carbon Brush (Fig. 7)
The carbon brushes must be checked and maintained after 75h of operation.
The machine comes with self-deactivating carbon motor brushes and will automatically switch off
once brushes have been worn down to a certain level.
To replace the carbon brushes, proceed as follows:
1/ Using a flat-blade screwdriver, unscrew the two brush holders (8) which are
located on either side of the motor casing.
2/ Remove the worn-out brushes and replace them with new brushes.
3/ Re-tighten both brush holders (8) ensuring that the brushes are securely fitted.
Fig. 7
6.4- Disposal
- Residues of mixing material: do not throw residues or left-overs with household rubbish, into gutter
or in the environment. Dispose of residues and left-overs in a collecting centre.
- Tool: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
Publicité
