Publicité
Les langues disponibles
Les langues disponibles
FEATURES IN PHONE MODE: hands-free (Bluetooth)
Press Phone to change the system to Phone mode.
Phones compatible with the Bluetooth® technology use either the Handssfree or the
Headset profile for transferring the call to the car stereo. The Hands-free profile offers
the most features.
When using your car stereo in Tuner or CD/MP3 mode, the unit automatically switches
to Phone mode if someone calls you. After the call, the car stereo returns to Tuner or
CD/MP3 mode. The driver does not need to take any action. The same applies when
you make a call via the car stereo.
Pairing :
Pairing is the first connection between your Bluetooth® phone and the car stereo. This
procedure is initiated via your phone. Search for any Bluetooth® peripherals. Once
«Parrot Car Stereo» is found, select it and your phone prompts you to enter a foursdigit
code. Enter 1234 and confirm. After the necessary data has been exchanged, you are
now Bluetooth® connected with the car stereo.
With some phones, a special mode needs to be enabled prior to pairing for access to
more features. Refer to Bluetooth > Settings > Pair a phone.
Synchronising the phone's phonebook :
With some Bluetooth phones, the phonebook is automatically synchronised in the kit's
memory. If your phone does not support automatic synchronisation, you can also use
the Object Push feature on your phone to send contacts from your phone to the car
stereo by Bluetooth®.
When synchronising the phonebook, the Bluetooth® icon scrolls over the screen.
Refer to your phone's user guide or our website for details on how to proceed:
«www.parrot.biz, at the section entitled Technical Support, User Guides»
Answering / Hanging up :
To answer a call, press the green button above the scroll wheel. Once you have fi- s
nished your conversation, press the red button to hang up.
Discreet mode :
During a call, press the green button to switch the conversation over to the phone.
Press the green button again to return the call to handssfree mode. This feature is only
available on phones with a Hands-free profile.
12
Caller ID :
When an incoming call is received, the caller's name or number is displayed. This
feature is only available on certain phones.
Making a call via the car stereo's interface :
Two options are available:
Change to Phone mode. Dial the phone number directly via the keypad and then press
the green button. To dial a number with «+» as the prefix, quickly press the zero key
twice.
You can also use the voice recognition feature (see below).
Voice recognition :
You can make calls using the car stereo's voice recognition feature. To do so, contacts
must be memorised in the kit's memory (automatic synchronisation of the phonebook or
contacts sent individually from the phone). You must have first recorded the keywords:
home, work, office, and so on, as well as the magic word «phone».
Once you have recorded the names, keywords and magic word, you can call a
contact as follows :
Say: Phone... (Beep)... Anna... (Beep)... Home... and the car stereo automatically
dials Anna's home number.
Similarly, if Anna calls you, you will hear «Anna». Press the green button to answer the
call. Press the red button to end the call. The car stereo automatically returns to Tuner,
CD/MP3 or Phone mode.
You can also use the following sequence for using the voice recognition feature, but
without keywords:Press the green button and the radio or CD is muted. You will hear
a beep.
Say the required person's name after the beep and if necessary, specify house, work
or office (if available).
Note: When recording the keywords and magic word, park your vehicle in a quiet
place with the windows closed and the heater/air conditioner off.
This is necessary to obtain a higher recognition rate.
Publicité
