CERTIFIED 009-0001-0 Guide D'assemblage Et D'utilisation page 5

1. Set the Service Cart up in the desired location.
2. Make certain to set both Locking Casters (# 5) once the Service Cart is in place. To
set the brakes, pull up on the tab located on each Locking Caster (# 5).
3. Do not exceed the maximum load capacity of 200 lb (91 kg) or 100 lb (45.4 kg)/shelf.
Inspection, maintenance and cleaning
Clean the Service Cart with a damp cloth. Do not use abrasive, harsh chemicals or
detergents as these will scratch and damage the components and frame.
Before each use, inspect the general condition of the Service Cart. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts and any
other condition that may affect its safe operation. Do not use damaged equipment.
Please read the following carefully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT THEY
ARE QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT THEY
ARE QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL
REPAIRS AND PARTS REPLACEMENTS SHALL BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF THEIR REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS, OR ARISING OUT OF THEIR
INSTALLATION OF REPLACEMENT PARTS.
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
All manuals and user guides at all-guides.com
Operating instructions
5