ETNA KKV143 Serie Mode D'emploi page 82

INSTALLATION AND CONNECTION
Remove the lower hinge and flip the hinge.
Attach the lower hinge on the other side.
Attach the adjustable feet on the other side.
Detach the door gasket and then attach it after rotating.
Lower the door onto the bottom hinge pin.
Fit the upper hinge on the opposite side with the screws. Check that the door is aligned
horizontally and vertically and that the seals are closed on all sides before finally tightening the
upper hinge. Place the cover plates.
Level the appliance with the adjustable feet.
Move the door handle from the left side of the door to the right side.
EN 16