Publicité
Les langues disponibles
Les langues disponibles
Loading Material
4.2
Loading Fanfold Labels
Fig. 8
Loading Fanfold Labels
1 Position label stack (2) behind the printer.
2 Guide material below the roll retainer (1) to the printing unit. Ensure that the printing side of the labels is
visible from above.
3 Turn lever (6) counterclockwise to open printhead.
4 If the printer is equipped with a cutter or perforation cutter, fold it down.
5 Position guides (3) by turning the knob (5) so that they are several millimeters wider than the material.
6 Position material below the belt roller (4) and guide it through the print unit.
NOTE
Guide material through the print unit below the label sensor (7).
34
All manuals and user guides at all-guides.com
7
1
2
3
4
5
6
1357590000/00/03.12
Publicité
