Ricatech RR500 Manuel D'utilisation page 3

This section describes the compact disc controls in the order in which you
would normally use them.
Follow the instruction in a step-by-step sequence and in a very short time
you will master complete operation of the unit.
CD OPERATION
1. Rotate the VOLUME knob from OFF position towards the Max position to
turn on the unit.
2. Push the CD DOOR once to open the CD DOOR to insert a disc into the
DISC TRAY then push the CD DOOR again to close the CD DOOR.
**Make sure the CD DOOR is closed properly**
3. Press PLAY button.
4. Adjust the listening level by rotating the VOLUME knob.
NOTES
 If the disc is seriously scratched, or too dirty, disc play may not start.
 If an improperly centered disc is played, noise can be heard in the
mechanism. The use of such disc should be avoided.
 Do not tilt the unit with discs loaded. Doing so may cause malfunction.
TO STOP DISC PLAY
Press the STOP button. Disc play will stop; the TRACK display will show the
total number of tracks.
TO LISTEN TO THE DESIRED TRACK
1. Press the F.F button, the CD player will skip ahead to the next track each
time when the F.F button.
2. Press the F.W button, the CD player will skip back to the previous track.
3. Press the PLAY button, play will start.
ENGLISH - 3