Elinchrom EL-Skyport 19352 Mode D'emploi page 5

Integrated SYNC Socket
The integrated 3.5mm Mono Jack socket is for direct connection to all flash brands with
max. 50 V SYNC voltage and a max. peak current of 0.5 Amps.
EL-Skyport Features
All EL-RX flash units accept computer operation. Use 19354, 19353 and the EL-Skyport
PC/MAC Software to access EXTRA features:
1. Automatic PnP (Plug and Play) detection. The software automatically adds
connected RX units to the unit list.
2. Flash Stand-By Mode: Activates and deactivates the flash trigger via EL-Skyport
Software
3. Adjustable independent Flash Delay triggering for flash sequencing, between 5
milliseconds and 16 seconds
4. The EL-Skyport software offers many additional features. For further information
please check www.elinchrom.com
6
All manuals and user guides at all-guides.com
EL-Skyport Modules
EL-Skyport Transmitter 19351
EL-Skyport Transceiver RX 19353
EL-Skyport USB RX 19354
• Universal Transmitter triggers all EL-Skyport Receivers via the Camera Hot-shoe or
SYNC cable!
• The Transceiver is only for Elinchrom RX units. This module operates all RX features
with the EL-Skyport / ERS- software and triggers the flash
• To operate RX flash units via the computer, the USB module, the Transceiver RX and
the EL-Skyport ERS- software is required.
Transceiver RX
Transmitter
19351
USB RX
19353 19354
7