Wetelux 83 63 55 Mode D'emploi page 17

All manuals and user guides at all-guides.com
built-in motion sensor (2) switches on the night light
when it senses movement. The built-in brightness sen-
sor (3) keeps the night light from being activated during
the day.
 After the mode selection switch has been moved to the
AUTO setting, the device needs approx. 1 minute to
warm up the motion sensor. During this time, the night
light is on (only when it is dark). After the warm-up
phase the light goes off as long as the motion sensor
does not sense any movement.
 The automatic night light function is now active. The
light will switch on whenever a person enters the motion
sensor field. The light will stay on as long as there is
movement near the sensor, and it will go off 30 seconds
after the last movement is registered.
Notes
 In "AUTO" mode the front light shines permanently in
darkness. The backlight (5) will be switched on addi-
tionally when the motion sensor detects motion within its
field of view.
 The night light function is only activated in darkness.
During the daytime this product can only be tested in
dark rooms.
 Pay attention that the brightness sensor (3) is not cov-
ered.
 Always unplug the night light when it is not in use for a
longer period of time.
Using
14