Teesa ERIS 750 Manuel D'utilisation page 26

26
Removing and cleaning filters
Note: Before removing or changing the filters make sure the appliance is
disconnected from the power supply socket.
Motor filter
1. Release the front cover fastening and open the front cover.
2. Remove the dust bag.
3. Grasp the filter and pull it out.
4. Clean the filter by tapping out the dirt.
5. It is recommended to rinse the filter under running water once a six
months or when the filter is so heavily soiled that it obstructs the suction.
Do not wash the motor filter in a washing machine!
Note: Let the filter dry completely before reassembly! Let it dry in an
open area.
6. When the filter is clean and dry, put it back into place, install the dust bag
and close the front cover.
Outlet filter
EN
1. Remove the outlet filter cover.
2. Grasp the filter and remove it.
3. Clean it by tapping out dirt or if heavily soiled, rinse it under running
water. Do not wash the outlet filter in a washing machine!
Note: Let the filter dry completely before reassembly! Let it dry in an
open area.
4. When the filter is clean and dry, put it back into place and close the outlet
filter cover until you hear a click.
• Bristle of the 2-step floor nozzle or small nozzle can be cleaned by tapping
out dirt.
• Clean the body of the vacuum cleaner with a soft, slightly damp cloth.
• Do not use any abrasives or chemical agents to clean this product.
• Non of the parts or accessories is suitable to be washed in a washing
machine or a dishwasher.
CLEANING
Owner's manual