Battery Disposal - Honsel VVG RivSmart Manuel D'utilisation D'origine

ing indicates that the battery (F) is worn out and
has to be replaced.
Observe the instructions on disposal.

BATTERY DISPOSAL

Li ion: Do not throw the battery (F) into the domes-
tic waste, fire or water. Batteries (F) are collected
and recycled or disposed of in an eco-friendly
manner.
For EU countries only:
In accordance with Directive 91/157/EEC, defective
or old batteries (F) must be recycled.
Batteries (F) that can no longer be used can be
returned to your dealer or directly to the manufac-
turer.
DISPOSAL OF RIVETER AND QUICK
CHARGER
Electric riveters, chargers, accessories and
packagings should be recycled in an eco-friendly
manner.
For EU countries only:
Do not throw electric riveters into the domestic
waste!
In accordance with European Directive 2002/96/EC
on Waste Electrical and Electronic Equipment and
its implementation in national law, electric riveters
must be collected separately and recycled in an
eco-friendly manner at the end of their useful life.
FUNCTIONS IN DETAIL
ADMIN CODE
The RivSmart (P) has two PIN code levels. These
serve to ensure safe operation of the riveter.
The first level brings you to the setup menu. The
standard password for the admin code is 1234.
This password can be changed in the app.
At the second level, acknowledgement of an error
in the process monitoring system (DMSD) is only
possible with the input of the PIN code, i.e. if the
PIN code is not entered, the riveter remains deacti-
vated. The DMSD code is 1111. This function and
the changing of the password can be carried out in
the app.
DATE AND TIME
Date and time can be changed in the setup menu.
If the app is used, the riveter (P) automatically
uses the time set on your smartphone / tablet. If
time and date are not set correctly, they will not
appear correctly on the display and the date and
time stamp will not be saved correctly on the SD
card (R).
COUNTERS
The RivSmart (P) has various counters.
Totaliser: This counter counts the total number of
rivets set. It cannot be deleted. When using the
app, various statistics can be called up here.
Individual counter: This counter can be activated
and reset in the setup menu and in the app.
JOB LITE
The Job Lite function serves to check whether
all the rivets have been set in a part. When the
number of rivets set in the setup menu or the app
is reached, the riveter (P) stops and has to be reac-
tivated by pressing the "OK key" (T). If the Job Lite
function is used together with the DMSD function,
you can select in the app whether, in the event of a
DMSD error,
• the rivet is to be marked by the worker for later
inspection / correction and the job is continued,
• the rivet is to be immediately drilled out by the
worker and a new rivet set and the job is contin-
ued (the faulty rivet is not counted),
• the part is discarded for later repair and the job
is stopped.
If you have to work with rivets of different length in
a part or you have different clamping forces when
working in Job and DMSD mode, you have to set
the stroke tolerance (and possibly also the force
tolerance) higher (100 %).
SOUND
The sounds of the keys (T) (U) and warning mes-
sages can be activated and deactivated individually
in the setup menu and in the app.
English | 49