Kolcraft Contours Options S70-T Mode D'emploi page 8

1 & 2
3
2
3
Button
All manuals and user guides at all-guides.com
To Attach Front Wheels
To Assemble Rear Wheels
Brake Levers
8
Align Front Wheel as shown.
1
Push Front Wheel up into the Front
2
Wheel Assembly until a "Click" is heard.
Repeat for other wheel. Tug firmly on
3
each wheel assembly to be sure wheels
are securely in place.
NOTE: To remove Front Wheels , twist
top of Front Wheel Assembly as shown,
and pull wheel off.
Turn stroller over as shown. Remove
1
protective sleeve from ends of brake
assembly with rear axle.
Position Brake Assembly as shown, with
2
brake levers pointing towards stroller
handle.
Push both brake assemblies onto rear
3
leg tubes at the same time until spring
loaded buttons click into place.
NOTE: If brake assemblies do not click
and hold in place, the spring button is
stuck and not protruding through the
hole in the tube. Use a screwdriver or
pliers to move the button so that it
protrudes out of the hole in the tube.
Continued on next page