Safety instructions
Ex / I.S. installation:
For a safe installation of 6333B in hazardous area the following must be
observed. The module must only be installed by qualified personnel who are
familiar with the national and international laws, directives and standards that
apply to this area.
Production year can be taken from the first two digits in the serial number.
Repair:
Repair of the module must be done by PR electronics A/S only.
14
All manuals and user guides at all-guides.com
As manufacturer
hereby declares that the following product:
is in conformity with the following directives and standards:
The EMC Directive 2004/108/EC and later amendments
For specification of the acceptable EMC performance level, refer to the
electrical specifications for the module.
The ATEX Directive 94/9/EC and later amendments
No changes are required to enable compliance with the replacement standards:
Notified body:
Rønde, 12 June 2009
EC DECLARATION OF CONFORMITY
PR electronics A/S
Lerbakken 10
DK-8410 Rønde
Type: 6333
Name: 2-wire programmable transmitter
EN 61326-1 : 2006
EN 50014 : 1997 E and EN 50020 : 1994
ATEX certificate: DEMKO 99ATEX126959 (6333B)
EN 60079-0 : 2006 and EN 60079-11 : 2007
UL International Demko A/S
Lyskær 8
P.O. Box 514
2730 Herlev
Danmark
Kim Rasmussen
Manufacturer's signature
15