Night & Day Furniture AUTUMN ARM Instructions De Montage

Assembly
Instructions
1 One pair of Bifold Arms.
i
Outside View
2
Hardware in this box.
60mm Bolts x 8
For the Front & Back Legs
40mm Bolts x 8
For the Wood Brackets
Barrel Wooden Dowel
Nuts x 8 x 4
3
Fasten Stretcher Brackets to Arm.
Dowel Hole
Hole for bolt
Hole for cleat
Leg
A. Insert the Stretcher Bracket Cleat
into the hole provided.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
C. Each arm requires two brackets, front and back.
i
Instructions for Bifold Body assembly, are packed in the Body box.
BIFOLD FUTON FRAME
AUTUMN ARM
Scale 1: 1
16mm Bolts x 4
For the Stretcher Brackets
Stretcher Allen Key
Bracket x 4
Cleat
16mm Bolt
Allen Key
Wood Brackets
x 4
4
Assemble the Bifold Body.
BODY INSTRUCTIONS: Instructions for assembly of
arms to the Wood Bifold Body are in the BODY box.
NOTE:
Wooden Dowels
Dowel from
ARM box
x 1
5
Fit Wood Brackets to the Arms.
Only after the Arms and Body have been completely
assembled, fix the Wood Brackets to the Arms.
Lift the Seat Deck to access the Bolt holes.
Before you attach the Wood
Brackets, make sure all other
Stretcher
Bolts are firmly tightened.
Bracket
Wood
Bracket
Inside View
Fitting
Tap dowel all the way into this
hole before assembly to arm.
40mm Bolt
Front Leg
See below for
Preparation of arms
for assembly.
BA-AUT-1118
Stretcher Rail
from BODY box
40mm Bolt
Page 1 of 1