Publicité
Les langues disponibles
Les langues disponibles
Getting Started
Assembly
1 Do not connect the mains plug yet.
2-3 Undo tank clasps and lift off the top section assembly.
4 Remove contents from inside the tank. Check and identify each component as listed in fig.1. If anything is
missing or damaged please contact your supplier immediately.
5a Insert a large wheel on each side of the rear basket and ensure they are pushed all the way in.
5b Turn the tank upside down and insert the moulded castor mountings into their positions in the black base.
Retain each castor moulding with the self-tapping screws provided.
6a For dry suction fit the paper dust bag.
6b For carpet washing or wet suction fit the foam filter.
7 Re-assemble the top to the tank.
8 Fasten the 2 clasps.
9 Attach the suction hose to the suction inlet on the front of the tank.
10 Push the end of the suction hose into the air diffuser handle. Push the end of the air diffuser handle into
the plastic tube. Fit the required accessory to the base of the plastic tube or directly to the diffuser handle if
the plastic tube is not required.
19
Publicité
