Samsung HW-Q800T Manuel page 20

05 USING A WIRED CONNECTION TO THE TV
Method 1. Connecting with HDMI
CAUTION
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
• To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals
marked ARC. Otherwise, the TV sound may not be output.
• Be sure to use the cable with the premium HDMI certification logo. In addition, make sure that
the cable is a certified Type A, high-speed HDMI Ethernet cable. (HIGH SPEED HDMI CABLE
WITH ETHERNET)
Connecting the TV that supports HDMI ARC (Audio Return Channel)
Connect to the HDMI IN
(ARC) port of your TV.
1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the figure.
2. Turn on the Soundbar and TV.
3. "TV ARC" appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• When the TV sound is not output, press the
Soundbar or the
screen displays "D.IN" and "TV ARC" in sequence, and TV sound is played.
• When connecting a TV that supports the eARC function, "eARC" appears on the display and the
sound is heard.
HDMI IN
(ARC)
(Source) button on the remote control to select the "D.IN" mode. The
SERVICE
HDMI Cable
DC 19V
Top of the Soundbar
(Multi Function) button at the top of the
ENG - 20
Connect to the HDMI TO TV
(eARC/ARC) port of the Soundbar
main unit.
HDMI TO TV
(eARC/ARC)
Bottom of the Soundbar
TV ARC