Publicité
Les langues disponibles
Les langues disponibles
Operation Instructions
Assemble the Unit
Note: Make sure that the hand-held vacuum cleaner
is not connected to the charger before mounting the
Mini Power Brush.
1. Remove the Upright Vacuum Cleaner, the 2in1 nozzle
and the Mini Power Brush from the packaging.
2. Plug the 2in1 nozzle onto the suction inlet of the
Upright Vacuum Cleaner.
3. Alternatively, the Mini Power Brush can be attached.
You will hear a "click" when it is mounted correctly.
Please make sure that the MIni Power brush is
inserted correctly before using the Upright Vacuum
Cleaner.
Charging Your Vacuum Cleaner
Note: The handheld vacuum cleaner and Mini Power
Brush will not work while charging.
1. Bring the hand vacuum cleaner, or the battery pack
individually, close to a power outlet.
2. Connect the charger to the battery. The battery status
indicator lamps will light up to indicate that the
vacuum cleaner is properly connected to the charger
and that the unit is being charged. When it's fully
charged, all of the 3 lamps will be turned off.
Instruction Manual ecoQ Rena
|
43
Publicité
