Jimmy H10 Flex Manuel D'instruction page 6

Packing List
Part name
Quantity
Part name
Quantity
Part name
Quantity
Part name
Quantity
Machine assembly
Assemble and disassemble electric
floor head with flexible metal tube
Hold the floor head with left hand, use right hand
to insert the metal tube vertically into floor head,
align with the conductive needle, press the tube
until a "click" sound is heard.
Attention:Keep the handle and floor head in the same
direction, conductive needle shall align with the socket.
When packing, storing or cleaning, if the electric
floor head needs to be removed, press the
brush release button and pull the metal tube in
the direction shown in the picture to take out
floor head.
Assemble battery pack with handheld
vacuum
Hold battery pack, align with guiding slot on handheld vacuum body, slide in battery pack in the
arrow direction in the picture. And then pull the battery pack after installation to make sure it
does not get loose.
Attention: when the vacuum cleaner is long idled, please remove the battery, pack the machine and store it in a cool
and dry place, avoid direct sunlight or humid environment.
4
Handheld vacuum
1
Flexible crevice tool
1
Adapter
1
Accessory holder left
1
Electric floor head Flexible metal tube
1
Soft brush
1
Carpet brushroll
1
Accessory holder
right
1
1
2
1
Connector
1
Electric mattress
head
1
Screw pack
1
Battery pack
1
Upholstery tool
1
Machine holder
assembly
1
User manual
1