Jimmy H10 Flex Manuel D'instruction page 11

Electric mattress head: Suitable for sofa and
bed mattress. The brushroll beats out and then
cleans the dust mite and allergen from deep sofa
or bed.
Connector: Can be connected to other tools and
bend to different angle to clean dust on top of
high cabinets or dust on the roof.
Cleaning and Replacing Parts
Attention:
1.HEPA filter is available for sale from local vacuum
cleaner distributors.
2.It is recommended to clean the dust cup after
each use; When the dust cup is full or the HEPA
filter is clogged, it needs to be cleaned and
replaced if necessary.
3.Electric floor head brushroll might be entangled
with hair after long time use. It needs to be cleaned
in time to keep the vacuum working moreefficiently.
Clean dust cup and filters
1.Press down the dust cup bottom cover to open
dust cup bottom cover. Fig
2.Dump dust into trash can.Fig
3.Hold dust cup lid and rotate anti-clockwise,
remove cyclone assembly from dust cup for
cleaning.Fig
3
4.Rotate cyclone anti-clockwise, disassemble
cyclone to clean.Fig
5.Hold HEPA lid and rotate anti-clockwise,
remove HEPA assembly from top cover and
then rotate HEPA lid to remove HPEA from the
lid for cleaning.Fig
6.If HEPA needs wash, hold the HEPA and rotate
clockwise, remove it from HEPA lid for
washing. HEPA needs completely dry before
reuse.Fig
6
7. After cleaning, assemble the parts back in the
opposite sequence of disassembly.
1
2
4
5
13
14
1
15
3
16
5
2
4
6
9