Vasco RF REMOTE CONTROL Manuel D'utilisation Et D'installation page 19

BINDING THE RF REMOTE CONTROL
EN
See also manual included with the radiator
packaging or on the website.
Is this sign already visible at the bottom right
on the display, as in the following example?
The radiator is already connected and you can
skip this step.
Attention:
- A maximum of 5 RF receivers can be connected to 1 RF remote
control.
- A maximum of 1 blower can be connected to 1 RF remote control.
- It's not possible to connect 1 blower and one or more RF receivers
to 1 RF remote control.
RF pairing:
1. a. RF reciever
Put the RF receiver in pairing mode by pressing the button for
5 sec. The LED will start to blink in RED.
5 sec. 5 sec.
b. Blower
Put the blower in frost protection mode by pressing 3x the button
mode
Then put the blower in pairing mode by pressing the button for
OK
5 sec. PAIR and will flash.
5 sec.
19