Publicité
Les langues disponibles
Les langues disponibles
6. Connect with Mi Home/Xiaomi Home App
EN
1. Scan the QR code on the scooter, located on the right
side of the footboard, or on the back cover of the user
manual to download the Mi Home APP.
Note:
· The QR code is unique to your scooter, please keep it safe.
· When connecting the scooter to the Mi Home/Xiaomi Home app, place your phone to the scooter as close as
possible to make sure it is within the effective Bluetooth range.
· If change the account, delete the scooter from the account it is paired with first, then reconnect the scooter with the
Mi Home/Xiaomi Home app.
Reset Bluetooth
Make sure the scooter is turned on. Squeeze the brake lever, and press the power button 5 times to reset. When the
scooter beeps, it has been reset successfully.
Restore Factory Settings
Make sure the scooter is turned on. Squeeze the brake lever, and simultaneously press and hold the power button for
7 seconds. When you hear a beep, the scooter has been restored to factory settings. This operation will completely
delete the data stored in the scooter, please proceed with caution.
Note: The scooter cannot be restored to factory settings during riding or when locked.
11
2. Open the Mi Home/Xiaomi Home app. Tap "+" on the
top right corner and open "Scan" to scan the QR code
again. Then follow the instructions in the app to add
the scooter.
7. How to Ride
Before riding
Before each ride, please check the status of your
scooter, including tire performance, remaining battery
level and scooter body state, and ensure that no part is
loose or damaged.
Before riding, please wear helmets, knee pads, elbow
pads, and other protective gear at all times.
EN
12
Publicité
