Bosch AHS 400-24T Instructions D'emploi page 10

Masquer les pouces Voir aussi pour AHS 400-24T:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Product Specification
Hedgecutter
Part number
Rated power
No-load stroke rate
Blade spacing
Cutting length
Weight
Protection class
Hedgecutter
Part number
Rated power
No-load stroke rate
Blade spacing
Cutting length
Weight
Protection class
Intended Use
The product is intended for cutting and trimming
hedges and bushes in domestic use.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your hedgecutter. It is impor-
tant that you read these instructions carefully.
Delivered Items
Carefully remove the machine from its packaging
and check for complete contents:
– Hedgecutter
– Blade guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
10 • 2 609 932 392 • 04.01
AHS 400 - 24T
AHS 480 - 24T
0 600 845 B..
0 600 845 C..
530 W
530 W
1400 spm
1400 spm
24 mm
24 mm
400 mm
480 mm
3.95 kg
4.05 kg
/ II
AHS 650 - 24ST
AHS 6000 PRO-T AHS 7000 PRO-T
0 600 845 F..
0 600 846 B..
550 W
650 W
1400 spm
1500 spm
24 mm
34 mm
650 mm
600 mm
4.25 kg
4.1 kg
/ II
English - 2
AHS 550 - 24ST
0 600 845 D..
550 W
1400 spm
24 mm
550 mm
4.1 kg
/ II
/ II
0 600 846 C..
650 W
1500 spm
34 mm
700 mm
4.2 kg
/ II
/ II
Operating Controls
1 Cutting blade
2 Front handle guard
3 Front handle switch levers
4 Ventilation slots
5 Rear handle with switch lever
6 Mains plug**
7 Blade guard
8 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
For Your Safety
Warning! Switch off, remove plug from mains
before adjusting, cleaning or if cable is cut,
damaged or entangled.
The blades continue to move for a few frac-
tions of a seconds after the hedgecutter is
switched off. Caution! Do not touch the mov-
ing blades.
Electrical Safety
Your machine is double insulated for safety and re-
quires no earth connection. The operating voltage is
230 V AC, 50 Hz. Only use approved extension ca-
bles. Contact your service agent for details.
Extension cords/leads should only be used if they
comply with H05VV-F or H05RN-F types.
AHS 600 - 24ST
0 600 845 E..
550 W
1400 spm
24 mm
600 mm
4.2 kg
/ II

Publicité

Table des Matières
loading

Table des Matières