LENCO PBC-10 Mode D'emploi page 8

Note: The check button is not an ON/OFF switch. The PBC-10
Automatically detects operational states, and no button clicks are
necessary.
When the PBC-10 battery becomes empty, the indicator lights will turn
off within one minute.
D. Charging your device
Connect your digital device (MP3 player, Bluetooth earphone or other
device) to the USB-A connector outside of the case or to the micro USB
cable inside of the case.
As charging is in progress, the PBC-10 indicator lights will be flashing.
1. USB-A port (Output 2: 5V 0.5A)
Or
2. Micro USB-cable, installed inside the PBC-10 (Output 1: 5V 0.2A)
Or
Tip: Using quality charge cable not only improves energy efficiency and
shortens the charge time, but also reduces the risk of potential damage
to your device and Power Bank Case
8