BWT PYTHON Serie Notice D'installation Et Conseils D'utilisation page 15

3
Pour the sand (granulometry 0.6/1.25) in carefully to avoid damaging the
laterals. Remove the cap from the collector tube and replace the diffuser.
4
Fit the o-rings into the grooves in the bulkhead fittings. Wrap teflon 4
times arund the pressure gauge threading and screw it into postion on
the multi-port valve having first remoced the plug.
Mount the multi-port valve. Connect the lower bulkhead fitting and then
the upper bulkhead fitting. Tighten the nuts moderately
5
Mount the air bleed valve (8) on the lid (9).
9
6
Fit the o-ring into the groove on the lid.
10
Note: Magic Lube (code 1397200) may be used to facilitate assembly.
Caution: all other types of lubricant are prohibited.
15/40
CONSTRUCTION & RÉNOVATION 2020/12 - Indice de révision : D - Code : 26625