Metabo HPT WH 18DSDL Instructions De Sécurité Et Mode D'emploi page 9

2. Battery Charger
Cord
Pilot lamp
<UC18YRSL>
SPECIFICATIONS
1. Cordless Impact Driver/Wrench
Model
No-load speed
Capacity
Tightening torque
(Maximum)
Bit shank size
Rechargeable battery
Weight
2. Battery Charger
Model
Input power source
Charging time
Charging voltage
Charger
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
Guide rail
Nameplate
Power mode
Save mode
Small screw
Ordinary bolt
High tension bolt
Pilot lamp
Nameplate
Fig. 2
WH18DSDL
5/32" – 3/8" (M4 – M10)
1/4" – 9/16" (M6 – M14)
1/4" – 15/32" (M6 – M12)
Power mode 1,510 in-lbs.
{170 N·m}
Save mode 840 in-lbs.
{95 N·m}
Tightening is 9/16" (M14) high
tension bolt, when fully charged
at 68°F (20°C) temp.
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
BSL1830: Li-ion 18 V (3.0 Ah)
UC18YRSL
Single phase: AC 120 V 60 Hz
Approx. 45 min.
DC 14.4 V – 18 V
DC 14.4 V: DC 3.5 A
DC 18 V: DC 3.5 A
1.3 lbs. (0.6 kg)
Cord
<UC18YFSL>
WR18DSDL
0 – 2,600/min
0 – 2,000/min
3/8" – 23/32" (M10 – M18)
5/16" – 9/16" (M8 – M14)
Power mode 188 ft·lbs.
Save mode 103 ft·lbs.
Tightening is 5/8" (M16) F10T,
when fully charged at 68°F
(20°C) temp.
Tightening time: 5 sec.
1/2" (12.7 mm) square
3.7 lbs. (1.7 kg)
UC18YFSL
1.1 lbs. (0.5 kg)
English
Guide rail
{255 N·m}
{140 N·m}
9