Publicité
Les langues disponibles
Les langues disponibles
7. Temperature calibration function
In standby mode, press PRG and
at the same time for 5 seconds to enter the temperature calibration
setting. The default temperature is 0℃. press
or
to set compensated temperature range from minus
5℃ to 5℃ . If there is no action after 10 seconds, setting will be saved automatically and go back to previous
interface.
For example, the temperature displayed on your radiator is 20°C. The one displayed on your thermometer is
18°C , choose the calibration value -2°C.
8. In case of power failure
All of the above settings for temperature, time, date of the week, and programs remain valid until the power is
removed.
After a power failure, when power is restored, the device will go back to the mode and temperature
selected before the power failure.
In the event of a power failure, the device only saves the following parameters: temperature and operating
mode. When the power is restored, the date and time must be set in order to make the various programs work
correctly.
Please check our video on Youtube for the process of installation and operation.
13
Publicité
