Télécharger Imprimer la page

Bestherm Atlas HT10PYG Manuel D'instructions page 23

Publicité

Les langues disponibles

Les langues disponibles

• The appliance should not be placed immediately
below a socket.
WARNINGS: In order to avoid overheating,
do not cover the heater.
• Do not use this heater with a programmer, timer,
separate remote-control system or any other
device that turns on the heater automatically
because there is a risk of fire if the device is
covered or placed incorrectly.
• CAUTION: To avoid hazard due to inadvertent
resetting of the thermal cutout, this appliance
must not be powered via an external switch, such
as a timer, or connected to a circuit that is
regularly switched on and off by the electricity
supplier.
• This heater must not be disposed of with
household waste; it must be taken to a local
center of recovery and recycling of electrical
appliances.
The heater must be installed so that switches and
other control devices cannot be
person in the bath or shower.
• A means of disconnection from the power supply
having a contact opening distance of all poles
must be included in the fixed wiring in accordance
with the installation requirements.
• WARNING: If this device is installed in a
bathroom, it must be installed at least 60 cm from
a bath or shower, in accordance with the
3
touched by a

Publicité

loading

Ce manuel est également adapté pour:

Atlas ht15pygAtlas ht20pyg