Publicité
Les langues disponibles
Les langues disponibles
•
If a fuel leak is found, do not start or run the engine until the leak has been repaired.
•
Make sure the fuel cap is properly closed.
•
Fuel stored in the carburetor for long periods of time can cause a hard start and increase repairs and maintenance
of the machine.
•
Always store fuel in approved containers. Do not use stored fuel for more than 2 months, it will make starting
more difficult and produce unsatisfactory engine performance.
MAINTENANCE, TRANSPORTATION AND STORAGE SAFETY
•
Do not modify product controls.
•
Check regularly for broken parts or other conditions that may affect the correct operation of the machine.
•
Only replace worn or damaged parts immediately with original spare parts.
•
Carry out regular maintenance on the machine. Do not attempt any maintenance or repair work not described in
this instruction manual. We recommend that maintenance and repairs not described in this manual be performed
by an Official Service Facility.
•
Follow the instructions for lubrication, tensioning and chain change accessories. An incorrectly tensioned and
greased chain can break and increase the risk of recoil.
•
Always clean the machine, especially the fuel tank, its surroundings and the air filter, of dust and dirt after
finishing work.
•
Turn off the machine and disconnect the spark plug before making any adjustments, filling up, changing
accessories, servicing, transporting or storing this machine.
•
Keep the handles of this machine dry and clean.
•
If the machine starts to vibrate strangely, turn it off and examine it for the cause. If you do not see the reason,
take your machine to the Official Technical Service.
•
Reduce the engine speed when turning off the engine. If the engine is equipped with a fuel shut-off valve, use
it when the engine has stopped.
•
To avoid burns or fire hazards, allow the equipment to cool completely before transporting or storing.
•
When transporting the product, ensure that the engine is stopped and that the machine is properly secured to
prevent it from tipping over, spilling fuel or becoming damaged.
•
When transporting the machine, hold the saw by the front handle with the machine off, the chain and sword
covered with the cover and at a distance from the body parts. When storing the chainsaw, always cover the
sword with the cover.
•
The equipment is not weatherproof, and should not be stored in direct sunlight, high ambient temperatures, or
in damp or wet locations.
•
Store the product out of the reach of children.
UNINVITED REACTIONS WHILE OPERATING WITH THE CHAINSAW
•
Always be careful when cutting with the chainsaw and be aware of any unexpected reaction forces. There are
three unforeseen reaction forces that occur on a chainsaw: rebound, forward pull and recoil.
REBOUND
•
If an object is touched with the cutting chain in the area of the tip of the sword while it is running. Contact of the
chain on the tip of the sword can cause an unforeseen reaction force that can push the tip of the sword upwards
generating a rotating movement that can cause the chain's sword to collide with the user. This reaction can result
in loss of control of the machine and severe personal injury.
PULL FORWARD
•
When the chain stops abruptly when it is caught in the cutting area by a foreign body in the wood or because it
is not cut properly. The chain, when stopped, pushes the saw forward and, if it is not correctly held against the
branch or tree by the claw, it causes an unexpected pull that can cause loss of control and severe personal injury.
63
EN
Publicité
