Hisense U5120GW Manuel D'utilisation page 8

3. Identifying the Parts
3.1 Main Unit
7 8 9 10
1 (ON/OFF) button
State Action
Function
On
• Follow source state
Semi
• Wi-Fi is still on.
Press
• It still supports Play-Fi and
Standby
once
Airplay2.
Eco
Press and • Wi-Fi is off.
• The product enters the lower
Standby
hold
power consumption mode.
5 seconds
• Restarting the system will
take a relatively longer time.
2
(SOURCE) button
Select the play function.
3 VOL+/VOL- buttons
Increase/decrease the volume level.
Wi-Fi LED indicator
4
LED State Status
Blink Wi-Fi Access Point (AP) mode
Double blink Wi-Fi Protected Setup (WPS) mode
Constant on
Connected / Paired successful
Display Window / Remote Control Sensor
5
Show the current status.
Receive signal from the remote control.
6 Screws
Remove the screws then install the wall
mounting screws into the back of the unit.
PF (Wi-Fi Setup) button
7
• Trigger Wi-Fi setup for Play-Fi.
8
11 12 13
1 2
6
• Press and hold the button ：
8 seconds
3 seconds
8 USB Socket
Insert the USB device to play music.
TYPE-C Socket
9
For the Dongle of wireless rear surround speaker.
The surround kit needs to be purchased
separately. This port can't be used to
connect to other Type C devices.
OPTICAL Socket
10
Use to connect to the OPTICAL OUT socket
on an external device.
COAXIAL Socket
11
Use to connect to the COAXIAL OUT socket
on an external device.
HDMI OUT (TV eARC/ARC) Socket
12
The port for connecting a TV. The port
supports the eARC/ARC HDMI feature, which
allows the soundbar to play audio that
originates on the connected TV.
HDMI IN (1/2) Sockets
13
Two HDMI ports for connecting HDMI source
devices, such as a DVD player, Blu-ray Disc™
player, or gaming console. Note that only
one HDMI input is usable at a time.
AC~ Socket
14
Connect to power supply.
3
5
14
Wi-Fi Access Point (AP) mode
Wi-Fi Protected Setup (WPS) mode
1 2 3
4