Publicité
Les langues disponibles
Les langues disponibles
6.3 DTS Play-Fi app setup
(For iOS and Android version)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch, Android
phones, etc.) to the same Wi-Fi network, you can
then use the DTS Play-Fi to control the soundbar
to listen to audio files.
1.
Connect your phone or tablet to the same
Wi-Fi network that you want to connect your
soundbar.
2.
Download and install the DTS Play-Fi on a
phone or tablet.
Play-Fi
•
Make sure your router is turned on and
working properly.
Press and hold PF (Wi-Fi Setup) button
3
located at the back cabinet for 8 sec to
trigger the Wi-Fi connection.
•
Until the speaker make a second tone and
then release the button.
4
Wait until the Wi-Fi light indicator on the
back cabinet goes from a fast blink to a
slow pulse. When it begins pulsing slowly, it
indicates that the speaker is entering the Wi-
Fi setup mode.
5
Launch the DTS Play-Fi. Follow the
instructions in the App to connect this
product to your Wi-Fi network.
6
After a successful Wi-Fi connection, the Wi-Fi
light indicator stops pulsing and stays on. After
setting up this product on your Wi-Fi network,
you can control it from any smartphone or
tablet on the same network.
•
When using the app to play music, the
display panel will show PLAY-FI.
7
After connection, you can change the device
name. There are several names to choose
from or create your own by choosing Custom
Name at the end of the name list. Otherwise,
it follows the default name.
14
8
After connection, this product may perform
a software update. Upgrade to the latest
software when it is your first time set up. The
software upgrade may take several minutes. Do
not unplug your speaker, turn off your device,
or leave the network during the update.
Note
• After connection, the product may perform a
software update. Upgrade is required after initial
setup. Without the upgrade, not all product features
can be available.
• When the first time setup is not successful, hold
down the Wi-Fi button on Soundbar for 8 seconds
until you hear the second tone and the Wi-Fi light
changes to slow pulse. Reset the Wi-Fi connection,
restart the app and start the setup again.
• If you want to change from one network to another,
you need to setup the connection again. Press hold
down the PF (Wi-Fi Setup) button on the Soundbar
for 8 seconds to reset the Wi-Fi connection.
6.4 Multi-room audio
•
This soundbar can be used as part of multi-
room speaker setup. This means that the
same music can be played from your
soundbar and other compatible speakers
simultaneously throughout your home.
•
To use this feature, make sure the soundbar
and your smartphone / tablet are on the
same network. You can use Google Home,
Airplay 2 or DTS Play-Fi app to control
compatible multiroom speakers. You can
then play the music on multiple speakers at
the same time, assign speakers to different
groups, control the volume individually, or
use master volume to change the volume on
all speakers at the same time.
6.5 Chromecast built-in
•
This soundbar supports Chromecast built-
in feature that allows you to cast music
from Chromecast compatible apps to your
soundbar.
•
To use this feature, make sure the soundbar
and your smartphone / tablet are on the
same network. Start playing music on a
Chromecastenabled app and cast it to your
soundbar simply by clicking the (cast) button
and selecting the soundbar from the list.
Publicité
