Télécharger Imprimer la page

Deltaplus LV130 Notice D'utilisation Et D'entretien page 7

Dispositifs d'ancrages

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4
User Instruction Manual of Horizontal Aluminum Flange Bar With Rollers (Beam Anchor) LV130
INSTRUCTIONS FOR USE:
This manual must be translated (according to regulations) by the dealer, in the language of the country where
the equipment is used.
For your safety, carefully follow the instructions for use, verification, maintenance and storage, described in
this leaflet. The DELTA PLUS GROUP company can not be held liable for any direct or indirect accident occurred
as a result of usage other than that provided in this manual. Do not use this equipment beyond its limits!
The user's safety depends on the continuing effectiveness of the equipment and the proper understanding of
the operating instructions outlined in this leaflet. You are personally responsible for the use of this device and
its safety measures.
Warnings:
This product is to be used as part of a personal fall protection system. It is intended to be used as an anchorage
point for either a shock-absorbing lanyard or self-retracting lifeline for fall arrest, or with a positioning lanyard
for fall restraint. This unit should not be used for material handing or any other use other than that of a fall
protection anchorage device. This product is intended for one person using.
TECHNICAL CHARACTERISTICS: (Fig. 1-2)
Adjusting clamp (jaw)
Load bar
with roller
Description of the product: (Fig. 3)
Load Bar Material: Aluminum Alloy 6066-T6
 Clamps(Jaws)With Roller: Aluminum Alloy 6066-T6
 D-Ring Material: Steel Alloy SAE4140- Nickel plating
 End Screw Material: Carbon Steel- Nickel plating
 Spring Material: Stainless steel
 Webbing Material: Polyester
 Minimum Breaking Strength: 15kN (3300LBS)
 Weight: 3.5kgs (7.7LBS)
This product meets requirements of the standard EN795:2012 Type B.
Conformity assessment was done and controlling of manufacturing is done
by notified body No. 1019, VVUU a.s., Pikartska 1337/7, 716 07
Ostrava-Radvanice, Czech Republic.
B.P. 140 - ZAC de La Peyrolière
84405 APT CEDEX - FRANCE
OPERATING INSTRUCTIONS
ANCHORAGE DEVICE (COMPLYING TO EN795-B)
End screw
Toggle
LV130 Anchorage device
EN
(Fig. 1)
Spring
Webbing
USE
DATE : 15.06.2016
(Fig. 2)
D. ring
Second screw
safety lock
(Fig. 3)
7/84

Publicité

loading