JB Systems Light LED MARVEL Mode D'emploi page 5

ENGLISH
DESCRIPTION + OPERATION:
1. LEVEL (DIMMER) button
2. MODE button
3. PT/COL button
4. SPEED button
5. S2L (Sound to Light) led
6. ON/OFF indicator
7. Base
8. DMX in/out connectors
9. Power adapter in/out
10. Microphone
Upon the user's choice, the
unit can work in stand-alone
automatic modes, or with
fixed colors, or it may be
controlled by the included IR
remote control or external
DMX-controllers.
This chapter refers
standalone operation
operation with the IR remote
control. Please see chapter "Synchronization and DMX control" for digital remote
control. For standalone operation, make sure that NO CABLE is plugged into the rear
"DMX IN" socket.
The user interface elements provide the following functions:
1. LEVEL button
By consecutively pressing this key on the main units itself, it allows the sequential
choice of 4 different brightness levels: 0%(off)/25/50/75/100%. The same levels are
available by means of the remote control; however the LEVEL up/down keys on the
remote control only allow to choose the 25/50/75/100% levels, while the blackout
function (0%) is directly available via the remote controls on/off key.
2. MODE button
By consecutively pressing this key on the main units itself, it allows the sequential choice of 5 different
operating modes:

CHASE: different chase patterns that can be selected with the PT/COL button – more details below.

FADE: fading between the 6 panels, different patterns can be selected with the PT/COL button –
more details below.

MOOD: all 6 panels fade from one color to another, different color cycles can be selected with the
PT/COL button – more details below.

SCENE: all 6 panels show the same color, 12 different colors can be selected with the PT/COL
button – more details below.

FLASH (STROBE): different patterns in white RGB each can be selected with the PT/COL button –
more details below.
Note: when using the IR remote, the 5 modes can be chosen directly by designated keys.
3. PT/COL button
This key changes – depending on the chosen MODE – either the color, or the pattern + color. The
choices in accordance to the chosen mode are:
In CHASE Mode: 5 pattern presets with switching transition in two color combinations each can be
chosen by consecutively pressing the PT/COL key on the unit itself or the PT/COL up/down keys on the
remote control:
Preset
01
JB SYSTEMS
®
to
and
Colour 1 Color 2
Red Blue
Color 3 Pattern
Green 3C-16-Zip-updown
3/44
USER MANUAL
LED MARVEL