Preparing The Vacuum Cleaner - Rotel SILENT U651CH2 Mode D'emploi

• PREPARING THE VACUUM CLEANER

o
Fit the hose on the vacuum cleaner by inserting the
rotating hose connection into the vacuum cleaner
until you hear a click. To remove the hose, press
the button at the side of the hose connection and
pull it out.
o
Assembling the telescope tube and accessories
▪
Fit the telescopic tube into the other end of the
hose.
▪
Adjust the length of the telescopic tube by pushing the
locking mechanism down and pulling in the bottom sec-
tion of the tube to a suitable length. When parking,
shorten the tube as far as possible.
▪
Fit the floor brush into the telescope tube.
o
The floor nozzle has two settings. When
cleaning hard surfaces(parquet flooring,
flooring tiles, etc.), the nozzle brushes
should be extended. When cleaning car-
pets and mats, the brushes should be re-
tracted into the nozzle. Press the brush
change button to switch between the two settings.
o
Joint nozzle for radiators, corners, skirtings, etc.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
35