Bosch GWS Professional 8-100 C Notice Originale page 9

OBJ_BUCH-708-005.book Page 9 Monday, November 21, 2016 10:43 AM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Spindle lock button
2 On/Off switch
3 Thumbwheel for speed preselection
(GWS 8-100 CE/GWS 8-125 CE/GWS 850 CE)
4 Auxiliary handle (insulated gripping surface)
Technical Data
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Speed control adjustment
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Reduced starting current
Constant electronic control
Speed preselection
Weight according to EPTA-Procedure 01:2014
Protection class
Angle Grinder
Article number
Rated power input
Output power
Rated speed
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools
5 Combination spanner for M 14 grinder spindle*
6 Combination spanner for M 10 grinder spindle*
7 Grinder spindle
8 Protection guard for grinding
9 Locking screw for protection guard
10 Mounting flange with O-ring
11 Grinding wheel*
12 Clamping nut
13 Quick-clamping nut
14 Carbide grinding head*
15 Protection guard for cutting*
16 Cutting disc*
17 Hand guard*
18 Rubber sanding plate*
19 Sanding sheet*
20 Round nut*
21 Cup brush*
22 Cutting guide with dust extraction protection guard *
23 Diamond cutting disc*
24 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS... 8-100 C
Professional
0 601 ... 377 ...
W 850
W 490
-1
min 11000
-1
min –
mm 100
M 10
mm 17


–
kg 1.8
/II
GWS... 8-125 CE
Professional
0 601 ... 378 ...
W 850
W 490
-1
min 11000
English | 9
*
8-100 CE 8-125 C
378 ... 377 ...
850 850
490 490
11000 11000
2800 –
– 11000
100 125
M 10 M 14
17 22
 
 

–
1.8 1.9
/II /II
850 C 850 CE
377 7.. 378 7..
377 9.. 378 9..
850 850
490 490
11000 11000
1 609 92A 2V8 | (21.11.16)