B) Settings - VOLTCRAFT BS-300XRSD Notice D'emploi

• Adjust the brightness control in the "OFF" direction to reduce the brightness of the LEDs or
to completely switch off the lighting and the endoscope. Please ensure that the camera is
switched off when adjusting the brightness control up to the end.
Switch the lighting on so that the camera picture displayed is not over or under exposed.
• Keep the ↑ button pressed for approximately two seconds to rotate the picture by 180º .
• Keep the ↓ button pressed to zoom in.
Attachments
• Fix one of the three attachments (magnet, hook, mirror) if needed to the narrow indentation
under the camera head.
• Make sure that the attachment's fastening ring is closed before use.
Triangle attachment point
A triangle attachment point is attached above the screen. Attach it to a carrying strap if needed
(not included in the delivery scope) to enable freehand operation.

b) Settings

The following buttons have the following functions within the menu.
Button
MENU
↓
↑
Release button
Video output format
• Press the MENU (7) button, to select the menu.
• Select the menu point "Setting" with the ↓ (8) or ↑ (10) buttons and press it to activate the
release button (9).
• Select the "TV output" menu point and confirm your selection.
Function
• Select menu
• Navigate from the sub menu back to the
main menu.
• Leave main menu
• Move cursor downwards
• Reduce value
• Move cursor upwards
• Enlarge value
Confirm selection
30