Publicité
Les langues disponibles
Les langues disponibles
EN
Machine Setup
This sanding machine is designed to be operated with a 1-1/2" remote
vacuum dust collection system.
Preparing Remote Vacuum Dust Collection Systems
To prepare the machine for remote vacuum dust collection system that have a 1-1/2"
hose end, connect vacuum hose to dust elbow on machine (Figure 4).
WARNING! Only operate machine connected to a functioning vacuum system.
Failure to do so will create a dusty environment and could result in dust inhalation.
NOTE: Start the remote vacuum collection system before operation.
Preparing the Machine for Operation
1. Familiarize yourself with machine. Read all danger, warning, and
caution statements and the Owner's Manual before operating this machine.
2. The machine will only accept hook and loop abrasive discs. When installing
abrasive disc, take care to center disc on driver (Figure 5).
Figure 4
Figure 5
FIGURE 4
SANDING DISC
8
Publicité
