Akrapovic Slip On Titanium Instructions D'installation page 8

www.akrapovic.com
2. Install the clamp from Akrapovič installation kit onto the muffler's inlet, as shown (F 05).
3. Slide the muffler onto the stock outlet, align it in respect to the motorcycle and tighten the muffler's bracket onto the
passenger's foot rest (using bolt, washer and nut from Akrapovič installation kit and stock Alu washer) (F 06, 07).
IMPORTANT: be careful not to damage any part of the motorcycle during this process!
F 05
F 06
8 / 12