Haier GE Appliances UAPT0912A Instructions D'installation

Before you begin installation, read these instructions completely and carefully.
Observe all governing codes and ordinances as they may apply.
Leave these instructions with the owner.
IMPORTANT SAFETY NOTICE
!
is to be installed only by a licensed and trained industry professional. The manufacturer will not
WARNING
For personal safety, disconnect system power before installing this accessory.
During installation, if ground wires, screws, straps, clips, or other means of attaching grounding
components are removed, they must be returned to their original positions and fastened securely.
Models: UAPT0912A, UAPT1824A, UAPT3048A
Supply Plenum Indoor Unit
Model Model
USYM09U
UAPT0912A
USYM12U
USYM18U
UAPT1824A
USYM24U
USYM30U
USYM36U
UAPT3048A
USYM42U
USYM48U
The supply plenum can be installed before or after indoor unit installation.
1. Align the plenum so that it slides over
2. Secure the plenum with sheet metal
screws or rivets.
3. Seal the connection with tape or duct
sealant.
4. Connect round duct to supply outlets
and secure with Panduit or tape.
built into the round outlets.
1
To avoid personal injury or property damage, this accessory
Air Inlet Air Inlet Plenum
Height Width Height
6-9/16" 23-3/8" 12"
6-9/16" 39-5/32" 12"
6-9/16" 55" 12"
Installation Instructions
Supply Plenum
Dimensions
Plenum Plenum
Width Depth
36" 18"
39-5/32" 18"
55" 19"
31-5000556 Rev. 1 04-23 GEA
Duct Take Duct Take
7-7/8" 5-1/2"
7-7/8" 5-1/2"
7-7/8" 5-1/2"