Haier Ge UAWB46A Instructions D'installation

Before you begin installation, read these instructions completely and carefully.
Observe all governing codes and ordinances as they may apply.
Leave these instructions with the owner.
IMPORTANT SAFETY NOTICE
!
is to be installed only by a licensed and trained industry professional. The manufacturer will not
assume liability for unqualified installers or failure to follow these instructions.
WARNING
!
For personal safety, disconnect system power before installing this accessory.
During installation, if ground wires, screws, straps, clips, or other means of attaching grounding
components are removed, they must be returned to their original positions and fastened securely.
Model: UAWB46A
Parts Included:
• Wind baffle (2 parts)
• 8 stainless self-tapping screws
• 4 screw covers
• This instruction sheet
Step 1:
Remove top screws from grille, slide the wind
baffle behind and replace the factory screws.
1
To avoid personal injury or property damage, this accessory
Step 2:
On some models, the grille screws can be used
in the same manner as the top. Use the sup-
plied screws if needed.
Installation Instructions
Wind Baffle
31-5000502 Rev. 1 04-22 GEA