Publicité
Les langues disponibles
Les langues disponibles
Instructions for use for the user
9.9. Setting the preset time
WARNING!
Risk of fire
Flammable objects that are placed on the heater will ignite and cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before you activate the preset timer function.
You can set the preset time in 15 minute intervals. The maximum preset time
totals 24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
15 minutes is shown as 8.15.
1. Start the sauna mode or the combi mode (see point 9.4 and 9.5.)
2. Press the preset time button
► The temperature selector
is shown in the temperature display
3. Press the preset time button
intervals.
4. Once you have reached the required preset time, wait a few seconds.
► The sauna control unit changes to standby mode and the timer starts
running.
► The temperature display
temperature selector
► Once the preset time has elapsed, the selected mode is started.
The most recently selected preset time is saved, which means the last
value can be recalled at the touch of a button. To reset the preset time
to 00:00, press the preset time button for one second.
.
7
flashes and the previously set preset time
3
4
, to increase the preset time in 15 minute
7
shows the remaining preset time and the
4
flashes.
3
.
p. 32/38
Publicité
