Roller Grill CD 1200 I Notice D'utilisation page 13

6. CLEANING AND MAINTENANCE
Disconnect the device
- Clean regularly the metallic parts after each use by using only use non-abrasive
products, warm water and wash liquid: avoid the abrasive toweling. Rinse your
device with a wet sponge and dry it with a soft cloth.
- Dry the device with a clean soft cloth.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
an irreparable way.
- Never immerse the cord or the plug in the water or quite other liquid to avoid any
electric shock.
- Every week the condenser must be removed from any dust with a vacuum-cleaner.
First, always disconnect the display before doing this operation. Then, to have an
access to the condenser on the bottom of the front facing. The container for the
evaporation of condensation particles must be cleaned with a wet sponge as well.
To have an access, on the back of the display remove the rear tole.
CAUTION: In places with a high rate of humidity (>60%), it is obligatory to
proceed to a total defrost every week.
7. TECHNICAL SPECIFICATIONS
Model
Effective Volume
Dimensions
Weight
Power
Gas
Temperature
Voltage
Frequency
Glasses
Colour
Wires colours correspondence :
CD 1200 I/B
280 l
1185x660x720 mm
150 Kg ????????????????????????
430 W ???????????????????????
R 134 A
+2° to +10° C
220-240 V ~
50-60 Hz
1048 x 490 mm (x2)
Stainless Steel or Stainless Steel and
Black
Phase Brown or Black or Grey
Neutral Blue
Earth Yellow-Green
13