DELTA DORE TYXIA 631 Mode D'emploi page 34

3/ Wireless association
3.1.2 Several receivers or motors are in association
standby mode
❶ On the remote control press
same time and hold for 3 seconds, until the red
LED flashes. Release.
The remote control searches the different receivers
or motors.
The LED flashes red, then briefly green as soon as a
new receiver is found.
❷ When the LED starts flashing red slowly, press
the button as many times as required to
select the receiver to associate.
The corresponding shutter activates briefly.
❸ Once the receiver has been found, press
❹ After a few seconds, the shutter will be activated
twice to confirm the association.
To exit association mode, press
34
and at the
.
for 3 seconds.